Woodhead® Aero-Motive® Slip Rings are designed for harsh environments to deliver electric current from a stationary position
to a rotating component.
Woodhead® Aero-Motive® SR-series slip rings have copper-graphite brushes with braided-copper shunts and copper-alloy rings to
provide maximum conductivity. Stainless-steel compression-brush springs provide constant, positive-brush contact. Brush holders feature
phenolic, hinged, stainless-steel mounting clips for easy installation and proper alignment. Insulators are shock and moisture resistant
with high dielectric strength and zinc-plated mounting studs for corrosion resistance.
Woodhead® Aero-Motive® AG-series silver slip rings (milliamps) are designed with silver-plated rings offering maximum conductivity
and signal quality. Brushes with silver contacts and braided-copper shunts provide lower contact resistance. These slip rings are ideal for
TV circuits, voice communications, thermocouples, strain gauges, and low-current signals.
Component-kits slip rings (30, 35 and 75A, horizontal or vertical mounting) are designed for applications where size is critical.
The component-kit slip ring has a shorter overall length of approximately 38mm (1.5") than the self-contained kit. An additional
feature is that fewer components make this a more economical choice; however, it does require extra mounting time. The brush studs require
mounting to a plate assuring proper alignment of the brushes to the ring. The brush studs are secured on one end only and have limits to
length of the slip ring to the number of conductors available. The lead-wire connection is at the end of the slip ring.
Self-contained slip rings (30, 35, 75 and 200A, horizontal or vertical mounting) are the most popular slip rings and are easily
mounted. The slip ring installs on a shaft approximately two-thirds the length of the ring. A 9.53mm (.375") drive pin that engages
in the drive plate guides the brush assembly movement. Additionally, these slip rings offer a greater option of conductors and are easily
replaced. The lead-wire connection is at the end of the slip ring and no brush studs need mounting.
Enclosed-slip rings (vertical mounting) are designed for indoor and outdoor applications. For weather-tight operation, the enclosed
slip ring must be installed with the main shaft vertical and pointed down allowing the breather drain to function properly. A 25.4mm (1")
NPT female thread is provided in the main shaft for mounting on external equipment; however, fuse protection should be provided. Horizontal
mounting is optional; in this case, the enclosed-slip ring will not be weather-tight.
Enter at least three characters of an Aero-Motive or Molex part number to retrive the list of all documents (such as specifications, manuals, guides, drawings, etc.) from our web site, referencing this part number:
Formal PDF Quotation
To obtain an instant formal printable PDF quotation use shopping cart and select "View PDF Quote", instead of checking out. Click here for instructions.
Your shopping cart is kept intact and you can still check out at a later time.
Features:
• Variety of festoon cables/hoses
• Metric and standard gland fittings
for flat and round cable
• Tow ropes provide connection
between trolleys
Features:
• Integrated-metal shield
• Available in four eye styles:
single, double, universal and
offset
• Available in closed- or open-
mesh for end-of-cable or mid-
cable installation
This web site is owned and operated by Brake Products, Inc.
16751 Hilltop Park Place
Chagrin Falls, Ohio 44023
Phone: (440) 543-7962
Fax: (440) 543-7963
Web: www.brakeproducts.com
Email: sales@brakeproducts.com
Federal ID #: 34-1473351
CAGE Code: 1QTP8
DUNS# 14-748-2392
Download: Form W-9
